ComSwitch 660 Programming Codes
How to enter the programming mode:
1. Disconnect the telephone line from TEL LINE IN
2. Pick up the telephone and press (#) until clicking stops
3. Enter the desired changes and press (*)
4. When you hear 3 beeps, press the (*) key again
5. Hang up the phone
6. Connect the telephone line to TEL LINE IN

Table 1

Feature # Feature Factory Setting Options
OFF ON
  0 Auto Ring Reduction ON 00 10
  1 Open Line Notification OFF 01 11
  2 Extension Detection ON 02 12
  3 TAD to FAX Transfer OFF 03 13
  4 Pulse Detection ON 04 14
  5 AutoFAX Transfer ON 05 15
  6 AutoFAX (CNG) Detection ON 06 16
  7 Reverse Modem Detection OFF 07 17

Table 2

Feature Setting # Feature Setting Factory Setting Options
  2 FAX Access Code 11 0 - 9999
  3 AUX Access Code 22 0 - 9999
  4 Rings Before Answering 01 1 - 99
  5 TAD / PHONE Ring Count 06 0 - 99
  6 FAX / AUX Ring Count 03 0 - 99
  8 Phantom Ring Type 01 1 to 7
999 Reset to Factory Settings