ComSwitch 3500 Programming Codes
How to enter the programming mode:
1. Pick up the telephone and press (#)(*)
2. Enter the desired changes and press (*)
3. When you hear 3 beeps, press the (*) key again
4. Hang up the phone
Feature # Feature Factory Setting Options
OFF ON
0 Auto Ring Reduction ON 00 10
1 Ring Reduction Reset ON 01 11
2 Fax CNG (calling) Tone Detection ON 02 12
3 Reverse Modem Detection OFF 03 13
4 Auto TAD Transfer ON 04 14
5 Pulse Dial Transfer ON 05 15
8 Mandatory TAD Transfer OFF 08 18
Click for Glossary of Terms
Feature Setting # Feature Setting Factory Setting Options
2 FAX/MODEM Port Transfer Code 99 Any 1 to 4 digits
3 Rings to TAD/PHONE Port 6 0 to 99
4 Reduced Rings 3 2 to 99
5 Rings to FAX/MODEM Port 4 0 to 99
6 Auto TAD Transfer Timer 20 seconds 0 to 50 seconds
7 Voice Timer 5 2 to 50 seconds
8 Voice Detection Sensitivity
(0=little or no line noise)
(8=High noise line)		 0 0 to 9
999 Reset to Factory Settings