ComShare 750 Programming Codes
How to enter the programming mode:
1. Pick up the telephone and press (#)(*)
2. Enter the desired changes and press (*)
3. When you hear 3 beeps, press the (*) key again
4. Hang up the phone
Feature # Feature Factory Setting Options
OFF ON
  0 Automatic Ring Reduction ON 00 10
  1 Open Line Notification OFF 01 11
  2 Extension Detection ON 02 12
  3 Automatic TAD Transfer OFF 03 13
  4 Pulse Transfer ON 04 14
  5 Automatic No Answer Transfer ON 05 15
  6 CNG Detection ON 06 16
  7 Reverse Modem Detection ON 07 17
  8 Remote Message Notification OFF 08 18
  9 Distinctive Ring Detection ON 09 19
10 Outbound Voice Exclusion OFF 010 110
11 Reverse Modem Port Selection MODEM Port 011 (Fax) 111 (Modem)
12 Automatic Transfer Port Selection FAX Port 012 (Fax) 112 (Modem)
Feature Setting # Feature Setting Factory Setting Options
21 Security Access Code 1234 Any 1 to 4 digits
22 Fax Access Code 11 Any 1 to 4 digits
23 Modem Access Code 22 Any 1 to 4 digits
31 TAD/PHONE Port Distinctive Ring Assignment 1 0 = OFF
1 = 1-burst ring
2 = 2-burst ring
3 = 3-burst ring
32 FAX Port Distinctive Ring Assignment 2 0 = OFF
1 = 1-burst ring
2 = 2-burst ring
3 = 3-burst ring
33 MODEM Port Distinctive Ring Assignment 3 0 = OFF
1 = 1-burst ring
2 = 2-burst ring
3 = 3-burst ring
40 Rings to Answer Call 1 1 to 99
41 Rings Available to TAD/PHONE Ports 6 0 to 99
42 Rings Available to FAX Port 3 1 to 99
43 Rings Available to MODEM Port 3 1 to 99
  5 Phantom Ring Style 1 1 to 7
  6 Automatic TAD Transfer Timer 30 (seconds) 0 to 99 (seconds)
  7 RMN Phone Number None Up to 16 digits
  8 RMN Conditions 0 0 = OFF
1 = TAD
2 = FAX
3 = MODEM
999 Reset to Factory Settings