| ASAP® TF 505 Programming Codes |
| How to enter the programming mode: |
| 1. Disconnect the telephone line from TEL LINE IN |
| 2. Pick up the telephone and press (#) until clicking stops |
| 3. Enter the desired changes and press (*) |
| 4. When you hear 3 beeps, press the (*) key again |
| 5. Hang up the phone |
| 6. Connect the telephone line to TEL LINE IN |
Table 1
| Feature Setting # | Feature Setting | Factory Setting | Options |
| 1 | FAX Access Code | 11 | Any 1 to 4 digits |
| 2 | AUX Access Code | 22 | Any 1 to 4 digits |
| 3 | Rings to Answer Call | 1 | 1 - 4 |
| 4 | TAD / PHONE Port Ring Count | 06 | 2 - 9 |
| 5 | FAX Port Ring Count | 03 | Adjusted automatically |
| 6 | AUX Port Ring Count | 03 | Adjusted automatically |
| 7 | CNG Detection Reverse Modem Detection Automatic TAD Transfer |
1 | See Table 2 for settings information |
| 8 | Phantom Ring Style | Call Command Communications for information |
| 999 | Reset to Factory Settings |
Table 2
| Keypad # | CNG Detection | Reverse Modem Detection | Automatic TAD Transfer |
| 0 | OFF | OFF | OFF |
| 1 | ON | OFF | OFF |
| 2 | OFF | ON | OFF |
| 3 | ON | ON | OFF |
| 4 | OFF | OFF | ON |
| 5 | ON | OFF | ON |
| 6 | OFF | ON | ON |
| 7 | ON | ON | ON |